How do I configure my existing device Yealink T23G, T29G, T34W, T46S, T48U, T54w to work with UniTel Voice?

Below are the instructions for configuring your Yealink T23G, T29G, T34W, T46S, T48U, T54W device for use with your Unitel Services.

Step 1 – Connect / Power On Phone

1. Unbox Device

2. Connect provided Network Cable to the port on the back of the device labeled “Internet”

3. Connect the Power cord to the port labeled “DC 5V”.

4. Plug cord into an outlet.

5. Connect the Handset Base to the power plug and connect the power plug to the outlet.

6. Device will startup and on the handset, you should see information (or a clock)

Step 2 – Obtain IP Address for Self-Management

1. With the Phone connected and powered on, the LCD screen should show a menu of options.

2. Press the Softkey for the “Menu”

3. Using the up/down arrows on the phone, navigate to Status

4. With Status selected press OK.

5. Note below the IP Address (identified as IPv4 on the LCD screen).
______________________________
i.e. 192.168.1.201 (one-nine-two-dot-one-six-eight-dot-one-dot-two-zero-one)

6. Note below the MAC Address (Identified as MAC on the LCD screen)
______________________________
i.e. 80:5E:C0:00:00:00

Step 3 – Configure Phone through Web Browser

From your computer’s web browser, enter the IP address from Step 2 into your search bar at the top of the page.
The default username is admin. The default password is admin
In the left-hand menu, click “Settings.”
After the list of settings expands, select “Auto Provision.”
Update Server URL to: http://208.89.105.252/125
- NOTE: We recommend copying and pasting the above URL.
At the bottom of the page, click the “Auto Provision Now” button.
When prompted “Are you sure to autop now?” choose OK
While the phone auto-provisions, you will see a message that says “Configuration updating …” and once finished, you will see a message that says “Operation Completed!”
- NOTE: This process may take up to 5 minutes.

Step 4.

Place a test call to an “Off-Network” number to confirm calls complete.
Place a test call to an “On-Network” number such as another Employees Extension.

How do I configure my existing device Yealink W52P / W56P / W60P to work with UniTel Voice

How do I configure my existing device Grandstream GXP2160 to work with UniTel Voice?

How do I configure my existing device Grandstream HT801/HT802 to work with UniTel Voice

How do I configure the Grandstream HT802 to work with UniTel Voice?

How do I configure Grandstream HT502 to work with UniTel Voice?